Gamma 5800 Els STRINGING MACHINE 6 POINT SC MOUNTING (Is Manual do Utilizador descarregar pdf (Página 15)

Clamping the First Main String

Secure the tensioned main string using the

remaining fixed clamp. Repeat the proce-

dure for all of the remaining main strings and

tie off following the racquet manufacturers

recommendations.

Follow the manufacturer's recommended

stringing pattern for one or two piece string-

ing. This will determine the starting point for

the cross strings. If applicable, tie the first

cross string using an appropriate starting

knot.

STRINGING THE FRAME

Weaving the Cross Strings

Weave the cross strings over and under the

main strings being careful to alternate the

weave direction of each consecutive cross

string so as to be opposite of the previously

installed cross string.

Completing the String Job

Once the final cross string is tensioned and

clamped, tie off at the appropriate hole

specified by the racquet manufacturer.

Remove the frame from the mounting sys-

tem by loosening the shoulder supports and

frame supports.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sem comentários

Gamma 5800 Els STRINGING MACHINE 6 POINT SC MOUNTING (Is Manual do Utilizador Página 15