Gamma X-Stringer X-ES STRINGING MACHINE (Issue 1 - May 2 Manual do Utilizador

OWNER'S MANUALIssue 1 - May 2004Copyright 2004 GAMMA Sports - All Rights ReservedX-ESSTRINGING MACHINE

9Pulling TensionTo pull tension, wrap the free string clock-wise around the gripper drum and positionthe string between the gripper jaws.The string mu

10Clamping the First Main StringSecure the tensioned main string using theremaining fixed clamp. Repeat the proce-dure for all of the remaining main

To open the drawers, reach under the rightside end caps to find the the spring loadedlatch handle. Pull the latch handle towardthe outside of the end

12PATHFINDER AWLOnce the awl is inserted, pull the handle ofthe awl outward while holding the tip sectionin place, leaving the outer sheath in thegrom

13MAINTENANCE and ADJUSTMENTSString Clamp Base AdjustmentThe string clamp bases do not require ad-justment. The simple “Lever Bolt & Nut”design, p

14Tension Calibration ProcedureIf you suspect that tensioner is not pulling thecorrect tension, you should check the tensionwith a Tension Calibrator

15TROUBLESHOOTING TIPSFUSE REPLACEMENTTo change the fuse, remove the power cord and pull the fuse holder straight out. Removethe old fuse from the hol

16NOTES

PARTS LIST17PART #4A56A891421MFSPPMFSPPMRSGD37101102103MMSPP131140141142143144145146A147148244DESCRIPTIONTURNTABLE BUSHINGRUBBER FEETCAP SCREW - M8BUS

18PARTS DRAWING

1LIMITED WARRANTYGAMMA Sports (GAMMA) warrants to the original purchaser that the X-STRINGER stringing machine ("EQUIPMENT")purchased is fre

2MACHINE FEATURES Electric Constant Pull Tensioner w/ 11 lb. to 89 lb. TensionRange Digital Tension Setting Display Professional Six Point “Quick

Support Post Installation (con’t)After removing the mounting bolt, removeand discard the plastic washers that areinstalled for shipping purposes.3ASS

ASSEMBLY INSTRUCTIONSSupport Post Installation (cont’d)Place the support post onto the central slotof the turntable. With your fingers placedthrough t

5POWER CONNECTION & CONTROLSFront Panel FeaturesA - String GripperB - Tension SwitchC - L.E.D. Tension DisplayD - Tension Adjustment KnobE - Calib

6MOUNTING THE FRAMEAdjusting the Frame Support PostsLoosen the lock bolts of the frame supportposts and space them apart with the framesupport slides

7MOUNTING THE FRAMESecuring the Frame Shoulder ClampsLock the shoulder supports in position byturning the knob at the base clockwise.Repeat the adjust

8STRINGING THE FRAMEClamp Base OperationTo lock the string clamp base to the turn-table, rotate the clamp base locking leverclockwise. To release the