Gamma X-Stringer X-6FC STRINGING MACHINE (Issue 4 - Nove Manual do Utilizador

OWNER'S MANUALIssue 4 - November 2012X-6FCSTRINGING MACHINE

10STRINGING THE FRAMEBase Clamp Operation Rotate the lever lock clockwise to secure the clamp base to the turntable.Reverse the clamping procedure to

11Gripping the StringWhile holding the tension bar slightly above horizontal, wrap the free string clockwise around the gripper drum once and position

12STRINGING THE FRAMEWeaving the Cross StringsFollow the manufacturer's recommended stringing pattern for one or two piece stringing. This will d

13Storage DrawersThere is one storage drawer located in the base of the machine. The drawer opens from the right side of the base and lock into the en

14PATHFINDER AWLOnce the awl is inserted, pull the handle of the awl outward while holding the tip section in place. This leaves the outer sheath in t

15Adjusting the ClampsThe clamps provided with your stringing machine will need minor adjustments accord-ing to string type, construction, and gauge.T

16CARE & CLEANINGWith time and use, the clamping surfaces of your machine may become oily or dirty and result in string or clamp slippage while st

17NOTES

18PARTS LIST 4A TURNTABLE BUSHING 6A CAP SCREW 8A SET SCREW- M5x6 9 WASHER 14 WASHER 21A FRAME SUPPORT SLIDE 25 TENSION BAR 26 TENSION BAR

19PARTS DRAWING256MRSG2554A29282725MCFCT312630A83X308A162163161258257319259323259278265266288SQ SB T B MMSPP28421A96A356144140141146A133143813573012

2

GAMMA SPORTS 200 Waterfront DrivePittsburgh, Pennsylvania 15222 Phone: 800.333.0337 Fax: 412.323.0317 Visit our website at www.gammasports.comCopyrig

3LIMITED WARRANTYGAMMA Sports (GAMMA) warrants to the original purchaser that the X-STRINGER stringing machine ("EQUIPMENT") purchased is fr

4MACHINE FEATURESDrop Weight Tensioner with 8 to 90 lbs Tension Range and Permanently Engraved Weight Scale Professional Six Point “Quick Mount” R

5ASSEMBLY INSTRUCTIONSEngaging the Drop Weight Bar StopThe stringing machine is shipped with the drop weight bar in the horizontal position. To limit

6ASSEMBLY INSTRUCTIONSInstalling the Frame Support PostsPlace the support post onto the central slot of the turntable. While holding the mounting plat

7Adjusting the Frame Support PostsLoosen the lock bolts of the frame support posts and space them apart with the frame support slides separated by the

8Frame Shoulder Support ArmAdjustmentBeing sure the shoulder supports are free to swivel in their mountings, simultaneously rotate the shoulder suppo

9Badminton Shoulder Support Protec-tion Pad InstallationSlide the badminton shoulder support cover over the shoulder supports. There is no need to re